oscilent corporation product specification oscilent corporation telephone: 1.949.252.0522 fax: 1.949.252.0522 email: sales@oscilent.com product specification www.oscilent.com rev a january 2011 oscilent controlled document ordering code / part number product description 813-if70.0m-19d 70.0mhz if saw filter 19.48mhz bandwidth specification contents o mechanical dimensions o test circuit o maximum ratings o electrical specification o frequency response o smith chart o vswr notes o electrostatic sensitive device (esd) o avoid excessive ultrasonic exposure o solderability compatible with jedec j-std-020c pb-free process, 260c peak reflow temperature o this product complies with eu dire ctive 2002/95/ec (rohs compliance)
oscilent part number 813-if70.0m-19d january 2011 rev a 70.0mhz if saw filter 19.48mhz bandwidth product specification p. 1 www.oscilent.com mechanical dimensions (mm) test circuit pin description a, b, c, d, f, g, h, i, j, l ground k input e output test fixture & values input l1=22nh, l2=82nh output l3=100nh source/load impedance 50 ?
oscilent part number 813-if70.0m-19d january 2011 rev a 70.0mhz if saw filter 19.48mhz bandwidth product specification p. 2 www.oscilent.com maximum ratings parameters description unit minimum typical maximum operating temperature range c - 25 - storage temperature range c -40 - 85 maximum dc voltage v - - 10 maximum input power dbm - - 10 source impedance (single ended) (1) ? - 50 - load impedance (single ended) (1) ? - 50 - notes: with matching network (ref. test ing environment circ uit as shown above). those impedances could be modified wi th different impedance values and/or structures, if necessary. electrical specification parameters description unit minimum typical maximum center frequency (fo) mhz - 70.0 - insertion loss at fo db - 12.5 15.0 bandwidth at ?1.0 db mhz 19.00 19.48 - bandwidth at ?3.0 db mhz - 20.05 - bandwidth at ?40.0 db mhz - 23.00 23.25 amplitude ripple (fo 9.375 mhz) db p-p - 0.79 1.00 group delay variation (fo 9.375 mhz) nsec - 48 80 absolute delay at fo sec - 1.15 - ultimate rejuction db 40 43 - relative attenuation: fc +10.8 mhz db 15 15 fc -10.8 mhz db 15 18 - temperature coefficient of frequency (tcf) ppm/c - -86 -
oscilent part number 813-if70.0m-19d january 2011 rev a 70.0mhz if saw filter 19.48mhz bandwidth product specification p. 3 www.oscilent.com frequency response bandwidth at ?1.0 db bandwidth at ?3.0 db bandwidth at ?40.0 db relative attenuation fo10.8mhz
oscilent part number 813-if70.0m-19d january 2011 rev a 70.0mhz if saw filter 19.48mhz bandwidth product specification p. 4 www.oscilent.com ripple variation fo9.375mhz group delay variation fo9.375mhz smith chart
oscilent part number 813-if70.0m-19d january 2011 rev a 70.0mhz if saw filter 19.48mhz bandwidth product specification p. 5 www.oscilent.com vswr
|
